Crate system crate system

Order is the be-all and end-all in our workshop. Our custom-made boxes are the heart of our system. Every screw, no matter how small, finds its place in these boxes, thanks to numerous small inserts designed for all needs. The special feature of our main boxes are the four magnets - the polarity must be checked before attaching them. This means that the boxes are not only stackable, but can also be combined, making organization even more flexible.

To keep an overview, we offer a numbered board on which the corresponding numbers of the crates can be placed. This board can be individually labeled by hand and serves as a practical addition to the crates. Our boxes are made of PLA and are printed with an infill of 20%. We recommend reinforcing the hinges to 80% infill to ensure greater stability. The closure clips, which are responsible for securing the boxes, are also printed with an infill of 80%.

You need four 5x2mm magnets for each box to ensure the desired stacking and combination capability. With our well thought-out and adaptable solution, optimum workshop organization is guaranteed.

Hexagon socket screws M3X25

The clips are very tight! You have to open and close the box more often so that they adjust and work more easily.

In our workshop, organization is key, and our custom-made crates are at the heart of our system. Every tiny screw finds its designated spot within these crates, thanks to the numerous small compartments designed to cater to all needs. What sets our main crates apart are the four magnets-prior to attaching them, attention must be paid to their polarity. This feature not only allows for stacking but also enables easy combination, enhancing the overall flexibility of organization.

To maintain an overview, we offer a numbered board where corresponding crate numbers can be affixed. This board can be personally annotated and serves as a practical supplement to the crates. Crafted from PLA, our crates boast a 20% infill, but we recommend reinforcing the hinges with an 80% infill for increased durability. Additionally, the clips securing the crates are printed with an 80% infill ratio.

For each crate, you'll need four 5x2mm magnets to ensure the desired stacking and combination capabilities. With our thoughtful and adaptable solution, optimal workshop organization is guaranteed.

hexagon socket Screws M3X25

The clips are very tight! One needs to open and close the crate more often so that they adapt and function more easily.

Please read the description.

Read the description.

Dimensions box inside 150x100x30mm

The crate dimensions inside are 150x100x30mm