Hi-Capa Shotshell HPA Adapter Shotgun shell

After my Aap-01 adapter I designed my own Hi-Capa version as well.
On first tests It worked well in my We Hi-Capa 5.1 Type K.

You may have to do some work after printing like drill holes to perfect size or sanding....

Video:
https://youtu.be/Mq6EYNTQBso?si=uxjR19euZGCmyxMZ

Its a working design if its printed as it should! If the outlet valve screws in your print is dialed in. The M7 thread for Festo connector is a tighter one, just use bigger force to screw in, it will hold ;)

This is MY OWN design, there are similar models on the internet but I designed this one from scratch. I own the original files on my computer, its not a copy!

It has a BB retension system, so if you change shells after its empty, no BB will fall off.

You must print it with SLA (resin) printer!
I have uploaded a picture about the slicer orientation.
Use proper supports!!! In some cases you may have to use scaling if the printer is not calibrated perfectly!

I'm using Anycubic Tough resin and Anycubic X6 Ks printer.

Parts needed:
-Hi-Capa magazine lip set
-Hi-Capa upper magazine valve (outlet valve)
-4,5mm springs for shell release latch and shell ejector
-M2,5x18 screw for shell release latch
-Festo M7 6mm hose connector link below ( type: QSM-M7-6-I-R )

-7x1 size O-ring for BB retention on the inlet tube

Festo M7 6mm hose connector:

https://www.ebay.com/itm/394799548211?hash=item5bebe30733:g:Y~wAAOSwgF9jv~36&amdata=enc%3AAQAIAAAA4HQVmC70ORPzaIIVIk9qLpa4PGs9jt9hXHi2iJK1506dIgiyi1gwv%2FxPCc5YeK2hjBFxDoA7CaWyiQkbPBhoQ4qqKS%2BSERbz7VPov%2Fnouw1nCHgLFsuWy3mNALXIKzC2kqZnNJoqev1iLOVJWeMMsWJ4GKcyZSWxkE7FQHZGnJVUckBhJiq9Aw7Nbz3uvSV63axUeGgmkhZuOCRIn8k7x42Ue2xr4ETDDDTLi6AbelHhDreiKcNFt4YOZoS7m4XdTQZs9ChFX%2F8X87BnhkVZUObBJqeA%2FRVJo5zCBAz6BMgk%7Ctkp%3ABFBMhNSJ5oBj

Printed with Anycubic tough resin 5s exposure