Flexi Factory Print-in-Place Mech Dragon

Update: 1_19_2024.... *Added Version 2 wings that were re-designed with a thicker connector. Also added a more "realistic" and shorter fire.

.......................................................................................

This Flexi Mechanical Dragon is an articulated "mostly" print-in-place model that needs NO supports.

I say "mostly" because the head and wings print separately, and just snap on, and the Fire slides into place.

Multiple printing options available in 3 ZIP files, including a wingless version.

• stl_Flexi Factory Mech Dragon_allfiles.zip (All STLs here) -Body -Body_Wingless Version -Fire -Head -Wing Left -Wing Right -One Plate

If you want to print everything at once in a single color, use the STL labeled "One Plate" Or for a better look, you can print the wings and fire separately in a different color.

• 3mf_Flexi Factory Mech Dragon_allfiles.zip (pre-Painted Bambu AMS and Prusa Files)

• Flexi Factory Mech Dragon Body_Printmill.zip (Straight versions for printmill)

Also Optimized for AMS, meaning if you are using a Bambu Printer with multiple colors, you should easily be able to use the fill tool for coloring. I have added a 3mf as well for convenience!

Like with all my Flexi's, I went through many iterations to make sure it was strong, and easy to print without supports.

Please feel free to share images of your prints on this page, I would love to see 'em.

Thank you.

P.S. If you like this design, Check out my other models.

https://www.cults3d.com/en/users/FlexiFactory/creations

ALL Flexi Factory designs are protected by Copyright Law. When you purchase, you do NOT have the right to sell any digital file or printed model of my designs without my explicit written consent.

To legally sell PRINTED models, you may obtain my permission through this link:

https://www.patreon.com/FlexiFactory or https://www.myminifactory.com/users/FlexiFactory

Please help support the creative work of each 3D artist and NEVER share or sell a digital file.

Easy Print

*No Supports (adding supports will hinder functionality)
*" Mostly" Print-in-place (snap on head and wings)
*15% infill
*I always like to use 3 walls
*PLA works best
*Glue stick can help