Skip to content

L3D - LWPLA Wing

IMG_2133.jpg L3D - LWPLA Wing
IMG_2134.jpg L3D - LWPLA Wing
IMG_2135.jpg L3D - LWPLA Wing
IMG_2140.jpg L3D - LWPLA Wing
Advertising
Share
Add to
Make
Advertising
?
Creation quality: 5.0/5 (1 vote)
Evaluation of members on the printability, utility, level of detail, etc.
  • 838 views
  • 4 likes
  • 3 downloads
License
3D design format
ZIP Folder details Close
  • L3D_Wing.zip
    • Canopy Front.stl
    • PLA Motor Mount.stl
    • PLA Motor Mount Attachment.stl
    • PLA Fuse Ring.stl
    • Main Wing.stl
    • Canopy Rear.stl
    • Elevon Inner.stl
    • PLA Nose.stl
    • PLA Wing Servo Trays.stl
    • PLA Wing cap.stl
    • Wing Inner.stl
    • Fin Top.stl
    • Fuse Rear.stl
    • Elevon Outer Joined.stl
    • Fuse Front.stl
    • Wing Tip.stl
    • LED Wing Manual.pdf
    • Fin Bottom.stl

Learn more about the formats
Publication date 2023-12-30 at 00:49
Design number 1675758
j_potosky

j_potosky

3D printer file info

3D model description

"L"earning "3D" Printed Design Wing

This design evolved from an interest in RC flying, 3D printing, and learning Fusion360. The overall approach is for vase mode style printing with some modifications but ultimately as few retractions as possible. The design is best printed in LW-PLA and requires a 2205 2300kv or similar motor. It accommodates a 1300 3S up front for balance. A single 6mm carbon spar is required (alternatively a
wooden dowel could be used) along with 3mm BBQ skewers as alignment pins between sections. This model has taken hundreds of hours of effort and is actually the third iteration until I was
comfortable with the repeatability of the print quality and flying characteristics. I wanted an easy to print wing, that was simple to hand toss (side arm), and a relaxing to fly wing.

Video: https://youtu.be/P3vCTb74l7k?si=nVBcuLSIMj7fYuEJ

Wingspan: 800mm
Requirements:
- 2300kv or similar drone motor
- 30/40A ESC based on motor ratings
- 3S 1300 or similar size battery
- 4ch rx
- 2 x 9g servos / pushrods
- 6mm carbon spar

3D printing settings

LW-PLA
235 / 60 degrees
53% flow
Overall similar settings to the Eclipson A LW profile

Full build guide and print settings included.

Tags

Advertising

Issue with this design? Report a problem.
Check out similar designs

Would you like to support Cults?

You like Cults and you want to help us continue the adventure independently? Please note that we are a small team of 3 people, therefore it is very simple to support us to maintain the activity and create future developments. Here are 4 solutions accessible to all:

  • ADVERTISING: Disable your banner blocker (AdBlock, …) and click on our banner ads.

  • AFFILIATION: Make your purchases online by clicking on our affiliate links here Amazon.

  • DONATE: If you want, you can make a donation via Ko-Fi πŸ’œ.

  • WORD OF MOUTH: Invite your friends to come, discover the platform and the magnificent 3D files shared by the community!

Sharing and downloading on Cults3D guarantees that designs remain in makers community hands! And not in the hands of the 3D printing or software giants who own the competing platforms and exploit the designs for their own commercial interests.

Cults3D is an independent, self-financed site that is not accountable to any investor or brand. Almost all of the site's revenues are paid back to the platform's makers. The content published on the site serves only the interests of its authors and not those of 3D printer brands who also wish to control the 3D modeling market.
Currency: USD
Cults.
100% secure payment by credit card, PayPal, Apple Pay, Google Pay, etc.
View all payment options.