Voronoi Dragonfly by Lucky 13 Toys

Lucky 13 Toys

Art>Sculptures

Print Profile(2)

All

P1S

P1P

X1 Carbon

X1E

A1 mini

0.15mm layer, 2 walls, 20% infill

Designer

1 h

1 plate

4.6(9)

Two Color by Object in 1 plate - 0.15mm layer, 2 walls, 20% infill

1.4 h

1 plate

4.9(8)

Boost

102

199

149

Released

Description

This is my own work, originally posted on Printables.

This model was originally created for the Voronoi patterns contest on Printables. This snap-fit model features posable ball-jointed wings and an elegant display stand.

Print Settings

Print files are divided into Body, Wings, and Stand. Just print one of each file. If you’ve printed any of my other jointed figures, you should be familiar with the recommended settings.

Material	PLA*, PETG, ABS, or ASA
Layer height	0.15mm (first layer 0.2mm)
Infill	10-20% rectilinear
Supports	None

*PLA is not recommended for the Body, because the sockets of the wing joints can break during assembly or become loose over time. However, it will work if it's all you have.

If you have issues with bed adhesion, try lowering your first layer speed and/or adding a brim.

Assembly

As always, assembly requires no glue or screws, just patience. :)

Insert the Abdomen (tail) through the Thorax and into the Head.
Snap the Wings into the sockets on the Thorax. The side that was touching the build plate should be facing up.
Insert the Arm of the display stand through the Base (from below) and then into the Thorax.
Pose the wings however you like!

This design is now under a CC BY 4.0 license. This means that you are free to share these files however you like, including selling prints, provided that you give proper attribution. You can give proper attribution by including this notice on your product page:

Please help me build my identity as a creator by referring to this design by its original name. Don't pass off my work as your own product.

Want to support future projects with a one-time donation? Make a PayPal donation here!

Documentation (1)

Assembly Guide (1)

assembly_845390d1-f502-458b-84d6-163a45407521.png

Comment & Rating (17)

@ExodusTech3D

Print Profile

0.15mm layer, 2 walls, 20% infill

Perfect

@Mr_Monaco_22

Print Profile

0.15mm layer, 2 walls, 20% infill

Sooooo coool!! Cannot wait to print more colors ...and maybe some clear filament wings!

@keysersoze87

Print Profile

Two Color by Object in 1 plate - 0.15mm layer, 2 walls, 20% infill

very beautiful

@LinkDesigns

Print Profile

0.15mm layer, 2 walls, 20% infill

Awesome design. Sequential profile printed great!

@zrowfks

Print Profile

0.15mm layer, 2 walls, 20% infill

@Br3tz3L

Print Profile

0.15mm layer, 2 walls, 20% infill

Bed Adhesion Issue:The main body part came off the bed twice with provided profile (other parts print just fine). Simple fix was to add a brim the third time to make it stick. Otherwise the model is great. Assembly is easy and holds well without glue. Thanks.