This prints in 3 pieces and screws into a wall or cabinet. Works with both meta quest 2 and meta quest 3 headsets and controllers. Its my second quest wall mount design. The first one took more vertical space with the holders above the headset. I wanted something more compact vertically since I have 3 headsets (2x quest 2 and 1x quest 3) all mounted in a vertical column on my entertainment center. This one is designed with the controllers on the left and right of the headset. Quest 2 and 3 hand controllers are similar enough they can be held by the same part. The quest 2 and 3 headsets are different enough that there are different parts for each (tried making a universal one but they are just not close enough).

• Plate1: right and left arms for holding the controllers. They work for both quest 2 and 3.
• Plate 2: quest 2 specific headset holder.
• Plate 3: quest 3 specific headset holder.

Printing

• Nothing fancy - I print with .2mm default profile
• no supports needed - screw holes use teardrops so nothing > 45 degrees

Assembly

1. There is a dovetail on the controller arms that slide into headset holder slots. It will be snug (which is a good thing). I use groove joint pliers to snap it together.
2. I use 7x #4 imperial (2.8mm) screws to screw into the cabinet. The screw holes themselves are 4mm in diameter.