Artemis PP700 Adjustable stock MkII

A fixed stock for the PP700 with an adjustable cheek rest and butt stock, in the shape of an modernized rifle stock. With an optional picatinny rail for a monopod for example. It is divided into smaller parts for easier printing.

Requirements:
- 2x M5x25mm hex + 2x M5 nut
- 2x M5x40mm + 2x M5 nut
- M5x35mm + M5 nut
- M5x15mm
- 4x M5x16mm + 4x M5 nut
- 2x M4x12mm countersunk (optional)

There are some exploded views in the pictures, which should be enough to assemble the stock. The only tricky part are the nuts inside the middle part and the grip. I used a magnetic screwdriver to hold the nuts in place in order to get in on the bolts. Furthermore, it is important to attach the middle part to the grip before attaching the rear part to the middle. You might need to sand some of the parts to fit it together.

The bolt connections on itself are already strong, but you might want to add some glue between the different pieces. Only if you don't have any plans to disassemble the stock.

Let me know if there is anything wrong, or if you have any questions.

The stock body parts and the grip are designed to be printed standing up. For the other parts, it does not really matter.

Infill: at least 20%
Perimeters: at least 3, more is better
Supports: yes, for the rear stock body part and the grip.