Portada de pelicula de John Wick creada con Hueforge
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Beige Transmission Distance: 8
PLA BambuLab Basic Jade White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #15 (1.28mm) swap to Gray
At layer #18 (1.52mm) swap to Beige
At layer #21 (1.76mm) swap to Jade White for the rest.