X1/P1 Stepper Motor Back Cover by nokiri

nokiri

3D Printer>3D Printer Parts

Print Profile(4)

All

P1P

P1S

X1 Carbon

X1E

Full Cover 0.2mm layer, 2 walls, 15% infill

Designer

43 min

1 plate

4.9(63)

Vented Hex 0.2mm layer, 2 walls, 15% infill

Designer

53 min

1 plate

4.7(41)

Vented Louver 0.2mm layer, 2 walls, 15% infill

Designer

59 min

1 plate

4.8(20)

0.16mm layer, 4 walls, 13% infill

46 min

1 plate

5.0(2)

Boost

240

542

138

816

601

Released

Description

The back of your printer is usually the dustiest place! The stepper motors have a opening in the back for maintenance purposes but is also a convenient place for dust to gather. Protect your motors by installing these simple covers that can possibly prolong your motor's lifespan! You can choose from a full cover that offer maximum protection or one of the two vented covers.

Installation:

The covers have a letter on them indicating which side it should go ("L" for left and “R” for right). Then, put the clip into the hole of the bracket and slide it inward.

If this is something that you like, check out my other cover!

Poop Chute Cutout Cover https://makerworld.com/en/models/168565#profileId-185262

Stepper Motor Front Cover https://makerworld.com/en/models/156517#profileId-171458

Comment & Rating (138)

@jensdoelfel99

Print Profile

Full Cover 0.2mm layer, 2 walls, 15% infill

perfekt funktioniert !

@fvi_85

Print Profile

Vented Louver 0.2mm layer, 2 walls, 15% infill

Nice

@user_1422294189

Print Profile

Vented Louver 0.2mm layer, 2 walls, 15% infill

easy to print, does its job well

@RafaelCz

Print Profile

Full Cover 0.2mm layer, 2 walls, 15% infill

Printed with DuraPro ASA from extrudr.

@SS_Stivi

Print Profile

Full Cover 0.2mm layer, 2 walls, 15% infill

Fits very good.

@spaceflight46

Print Profile

Vented Louver 0.2mm layer, 2 walls, 15% infill

Fits nicely, looks greate and printed without an issue 5/5 stars

@darkmajin

Print Profile

Full Cover 0.2mm layer, 2 walls, 15% infill

works as intended :)

@user_1384144238

Print Profile

Vented Hex 0.2mm layer, 2 walls, 15% infill

it took a couple tries printing but I slowed down to silent and it came out great

@user_2325287358

Print Profile

Vented Louver 0.2mm layer, 2 walls, 15% infill

printed the louver style as that's the only one I saw dust benefit from. very nice fit.

@user_4093079595

Print Profile

Full Cover 0.2mm layer, 2 walls, 15% infill

Very nice

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.