There are three types of key holders available here.  All of them hold 5 keys and use 12x3mm cylinder magnets to hold them in place:

• Key_Rack-1J
• Key_Rack-1J-PHOTO
• Key_Rack-1J-PHOTO-TRAY

The tray version can hold several normal pens, and requires an additional 5 12x3mm cylinder magnets.  I used some clear transparency film to protect the photo.

The 4x6 photo on my print was a bit hard to get installed, so I increased the dimensions of the photo pocket by 1mm to help with that.  I printed with supports (touching build plate).  The model has some internal structures in the hooks which are designed to strengthen the part which may not work well with nozzles larger than 0.6mm.  

I suggest printing with 0.2mm layers or smaller.

If you want a simple wall mounted key hanger similar to this, you can find one here.

If you find these models useful, please post a like or a comment with some pics of your prints.

You can find the other things I'm working on at my blog here. You can also follow me here or on Printables to see what new stuff I post. If you would like to support my work, you can Buy Me A Coffee using this link:

https://www.buymeacoffee.com/mystoopidstuff

Thanks for looking!