Hueforge Jason Vorhees with Crystal Lake on fire. File and print is large (200x240) and if you dont have a beefy computer will take a long time to slice.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 1.6
PLA BambuLab Matte Dark Blue Transmission Distance: 1
PLA BambuLab Matte Scarlet Red Transmission Distance: 2
PLA BambuLab Matte Mandarin Orange Transmission Distance: 3
PLA BambuLab Matte Lemon Yellow Transmission Distance: 4
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #12 (1.04mm) swap to Dark Blue
At layer #13 (1.12mm) swap to Scarlet Red
At layer #16 (1.36mm) swap to Mandarin Orange
At layer #22 (1.84mm) swap to Lemon Yellow
At layer #24 (2mm) swap to Ivory White for the rest.