LEVEL 1 of Tower maze - the ultimate maze!
LEVEL 1 of Tower maze - the ultimate maze!
Print Profile(2)
Description
Who’s up for a massive challenge? Well here’s one for you - I designed 10 different maze levels, each more complex than the previous one. This design is for the maze level 1. While the maze design is level 1, the cup that has the hooks is designed to fit all 10 levels, so if you choose to do more than one level, you don’t need to print the cup 10 times (unless you want to).
Print specifications:
LEVEL 1 MAZE:
Print Dimensions: Height =11 cm (4.33 Inches) | Diameter of 5.35 cm (2.11 inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 1 hours and 59 Minutes
Amount of material required: ~ 17.2 m
The case for the maze
Print Dimensions: Height =9.8 cm (3.86 Inches) | Diameter of 5.4 cm (2.13 inches)
Layer height: 0.2 mm
Infill type: Gyroid
Infill percentage: 12%
Print speed: 250 mm/s
Print time: 2 hours and 29 Minutes
Amount of material required: ~ 20.4 m
Other levels can be found here:
Comment & Rating (4)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
