Hey there,

the plantring wallholder is here!

I would greatly appreciate it if you could take a moment to like this post and also follow me for more amazing content! Your support truly means a lot to me. Thank you so much in advance!

First of all: it´s not only for Skadis. You can screw it with my holder to your wall in your living room or wherever you´d like to mount it.

The idea is simpel: just print the ring in the size that you need ( it doesn´t need to be a plantpot, a pencilholder or anything else that fits is also possible)

You can also use it for a scarf or towel or anything you can imagine.

The ring is in 10mm steps from 60 to 130mm, the last number in the file name ist the outer diameter.

The rings thickness is 20mm.

For the HOLDER visit !!!HERE!!!

Watch my collection for even more Skadis accessories !!! HERE !!!

IMPORTANT if you download and don´t use my printing profile make sure the Z seam is not where the holder sits. Otherwise, it is hard to get it on the holder.

I personally print them at 0.2 layer height, 5 walls, and 15% Gyroid infill, but it depends on how much weight they need to hold.

I´m going to upload several things in the next period of time, so if you like what I am doing follow me and check it out.

If you like my work and want to support me you can buy me a coffee HERE

If you have any special requirements and need other diameters: just hit me up, I´ll try my best to design it for you.

Happy Printing!