The Construction Cone Stress Ball

Printing Tips :

• If you are not using the provided profiles, add a small 5mm diameter cylinder modifier with no bottoms at the bottom of the cone
• Print in TPU, Duramic 3D 95A will work great
• Option 1 : 0,4mm nozzle profile is squishy but stiff
• Option 2 : 0,6mm nozzle profile will give a squishier feel
• Generic TPU filament profile worked great for me

Printing Settings :

• For a 0,4mm nozzle : 0,20mm layers, 6 tops, 3 bottoms, 2 walls, 5% gyroid infill
• For a 0,6mm nozzle : 0,24mm layers, 4 tops. 3 bottoms, 1 wall, 4% gyroid infill

Disclaimer :

• AMS and AMS Lite are not meant to feed TPU to the printer, use the external spool option
• The hole at the bottom of the print is meant to be there, it helps air escape and enhances the squishiness
• The squishiness of the stress ball will vary with TPU hardness, brand and color, you can play around with the infill % to change the feel