Rachel Foley - Residual Evil - Collectible Rare Model

When you download you will have 17 Stl Files

1.Rachel Foley Figure
2.Rachel Foley Base
3.Full Body With Base

Disassembled Parts

1.Rachel Hip and Upper Legs Disassembled
2.Rachel Base Disassembled
3.Rachel Left Arm Disassembled
4.Rachel Left Leg Disassembled
5.Rachel Right Arm Disassembled
6.Rachel Right Leg Leg Disassembled
7.Rachel Torso with Head Disassembled

Sliced Flat Cut Parts

1.Rachel Torso With Head Sliced Flat Cut
2.Rachel Hip and Upper Legs With Head Sliced Flat Cut
3.Rachel Right arm with Gun With Head Sliced Flat Cut
4.Rachel Left Arm Sliced Flat Cut
5.Rachel Left Leg Sliced Flat Cut
6.Rachel Right Leg Sliced Flat Cut
7.Rachel Base Sliced Flat Cut

This product is Nuskul Art Collectible Edition.
Designed using 3D Max and Zbrush. -It is a detailed product that can be easily printed.

Follow me for more models
You can send me a message about the model or in general.
You can also reach me via social media.

Twitter : https://twitter.com/YunusKullebi
Instagram: https://www.instagram.com/yunuskullebi/
Instagram : https://www.instagram.com/nuskulart/
Linktr : https://linktr.ee/yunuskullebi

Print Temperature : : 200
Table Temperature : 60
Layer Height : 0.2 mm
Intıal Layer Heigt : 0.2 mm
Wall Line Count : 0.4 mm
Fill Density : % 20

Support Settings

Support Stracture : Tree
Maximum Branch Angle : 60
Branch Diameter : 3
Trunk Diameter : 16
Branch Diameter Angle : 5
Support Placement : Everywhere
Prefferred Branch Angle : 25
Diameter İncrase to Model : 1
Minimum Height to Model : 3
Intial Layer Diameter : 6
Branch Destinty : 20
Tip Diameter : 0.8
Limit Branch Reach : Yes
Optimal Branch Range : 30
Rest Preference : On Model if Required
Support Overhang Angle : 55
Support Pattern : Gyroid
Connect Support Lines : Yes
Support Density : 5
Support Line Distance : 8
Intial Layer Support Line Distance :8
Support interface Thicknes : 1.2