Hello!
This is the largest color set print I've done so far, please feel free to swap colors accordingly as you see fit!
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA Overture Matte Black Transmission Distance: 0.1
PLA Paramount 3D Fighter Jet Blue Transmission Distance: 1.5
PLA PolyLite Steel Grey Transmission Distance: 1
PLA BambuLab Matte Dark Red Transmission Distance: 1.5
PLA BambuLab Matte Sakura Pink Transmission Distance: 3
PLA BambuLab Basic Red Transmission Distance: 4
PLA PolyLite Grey Transmission Distance: 1
PLA BambuLab Matte Ivory White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Black
At layer #8 (0.72mm) swap to Fighter Jet Blue
At layer #10 (0.88mm) swap to Steel Grey
At layer #12 (1.04mm) swap to Dark Red
At layer #13 (1.12mm) swap to Sakura Pink
At layer #14 (1.2mm) swap to Red
At layer #16 (1.36mm) swap to Grey
At layer #17 (1.44mm) swap to Ivory White for the rest.