Tag3mand

427850612_715594857229907_3451172155171283381_n (1)_b107b0d4-d9e1-4fd7-8ff9-5144db080aea.jpg

428111207_768334148521104_8799353770038343700_n_922d40aa-d074-4a3f-b641-2998d08a28c1.jpg

428018193_927823675673137_3443457593200314193_n_c7a670bf-bb47-41be-9a9c-2eea6ffc8767.jpg

428340775_267448086385125_7157216729415525968_n_032d5fb8-7993-41f2-8a04-e01cc9467d91.jpg

0,4mm_6f06bbbc-87ef-4f99-8303-b67ad2834919.webp

427850612_715594857229907_3451172155171283381_n (1)_b107b0d4-d9e1-4fd7-8ff9-5144db080aea.webp

plate_1.png

The changes I have made are;   -The biggest differences I have made to this version, is that I have made the box bigger and the handle taller with extra reinforcemt, and also made it fit a large varaity of cans. It holds the 70mm easily and with a little room left over, so you can scale it down in the slicer to make it fit your own spray cans.  - I have made my own ´organic-looking´ seperators/ribs to reduce the print time and material use, and to add some stifness to the walls and handle. &nbsp;- Furthermore I have tried to reduce the material usage by making the bottom perforated with small hexagons, without compromising the overall strength and making room for even more possibilities for customizing it,  &nbsp;

0.2mm layer, 2 walls, 30% infill

Box1_4351a802-4818-4f9f-8892-5fa078c82e3a.webp

plate_1.webp

Added a 0,6mm nozzle profile to reduse print time. &nbsp;please change your z-hop (if you need it) :)

0.6mm nozzle, 0.42mm layer, 2 walls, 15% infill

Beer Box 6-Pack

Since a lot of people seem to ask about different uses for the beer can box-version, i figured I might as well chip in with this spray can-version. &nbsp;

Spray can box - Single color print

Global

Print Profile(2)

Description

Comment & Rating (0)

This remix is based on

License

Related Models

Pringles Spray Can-Shaker / Mixer

Compressed Air Nozzle Replacement

Flat Print Display Stand

can rack with back stop and stack index