This is my first upload, and first hueforge go! It's 200x200 (please don't adjust the z axis!) Enjoy! Let me know what you think.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PETG JAYO Black Transmission Distance: 0.3
PLA BambuLab Basic Blue Gray Transmission Distance: 2.5
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PETG JAYO White Transmission Distance: 6
!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!
Swap Instructions:
Start with Black
At layer #13 (1.12mm) swap to Blue Gray
At layer #21 (1.76mm) swap to Latte Brown
At layer #26 (2.16mm) swap to White for the rest.
I've found that if your layers don't match from file to slicer, just use the mm numbers that are in ( ) and it's the same.