This is a Gridfinity Holder for the 6X2mm Magnet Dispenser

This holder can hold (yes I repeated the same word twice, shoot me) 4 dispensers. Need to hold more dispensers, simply print more holders.

Required Materials:
28G Filament

4 6X2mm Magnets

Assembly:

Flip the holder over, so that it is face down a** up.
Press fit the 6X2mm magnets into their respective holes.

Fllip back over.
Drop into your Gridfinity Base.
Insert Dispensers.

Dispenser Info:

Each dispenser can hold over 50 magnets. A magnet inserted into the slider allows for your 6X2mm magnets to follow the slider in either direction. The opening of the dispenser has a flanged lip. This is to keep your magnets from falling out if the dispenser is facing the floor and/or dropped.

To dispense magnets, simply push on the Slider Plug toward the opening.

Required Materials:
13G Filament
1 4X2mm Magnet

Assembly:

Insert 4X2mm magnet into Slider Plug.
Insert plug into dispenser with the magnet toward the opening.
Insert 6X2mm magnets into dispenser.

Happy printing!

Version Notes:
1.0 - Original.
1.2 - Made compatible with new slider plug.

1.3 - Made bottom magnet holes press fit to avoid the glue mess.