Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA BambuLab Basic Blue Gray Transmission Distance: 3
PLA BambuLab Basic Brown Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Matte Ivory White Transmission Distance: 4

Swap Instructions:
Start with Charcoal
At layer #5 (0.48mm) swap to Blue Gray
At layer #7 (0.64mm) swap to Brown
At layer #8 (0.64mm) swap to Yellow
At layer #9 (0.72mm) swap to Ivory White for the rest.