Owing to upload limitations, I shrunk the picture to 100x60
I printed at 200x120 - so feel free to scale - DO NOT CHANGE THE Z HEIGHT!!!!!
Escher Geese.
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
SUNLU PLA Black Transmission Distance: 0.3
Bambu Gray PLA Transmission Distance: 2.5
SUNLU PLA CREAM Transmission Distance: 2
SUNLU PLA White Transmission Distance: 6
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Gray
At layer #13 (1.12mm) swap to Cream
At layer #20 (1.68mm) swap to White for the rest.