Summary

Why buy something when you can print it yourself? The fish tank lacks a small net for fishing, so it’s not cost-effective to buy it individually, and it’s really useless if you buy too much, so I spent some time drawing it, and if it breaks in the future, I can just reprint it, and use whatever color I want.

It is very convenient to catch some debris and larger fish. The fishing net has a diameter of 5cm, a hemispherical shape, a depth of 2.5cm, and a mesh of 4mm.

When printing, the opening should be downward. If you place it diagonally, you can print a larger area in the same area. It is best to turn on the hot bed for bonding, just the outside. The length is 18.6cm, the maximum printing length of the 256x256 heated bed is 31cm, and the mesh diameter is 8.5cm.

At 100% zoom, 95% filling, brim only on the outside, the printing time is about 40 minutes, the consumables used are about 6.4g, and the cost is less than 30 cents, which is very cost-effective.

自己能打印的东西为什么要买呢？鱼缸缺个小网捞，单买不合算，买多了真没啥用，所以花点时间画出来，日后坏了的时候直接重新打印，想要什么颜色就用什么颜色。

捞点杂物，稍大点的鱼还是很方便的，渔网直径5cm，半球形，深度2.5cm，网孔4mm。

打印时候开口向下，斜着放可以在相同面积打印更大一些，最好开热床粘接，外部即可。长度18.6cm，256x256的热床最大可以打印长度31cm，网口直径8.5cm。

100%缩放时候，95%填充，Brim仅外侧，打印时间大约40分钟，使用耗材大约6.4g，成本不到3毛钱，性价比相当高了。