perezLP

cover

heater_leg_2_38d10270-f621-4a16-9629-1f32a871ece0.jpg

heater_leg_160f21c0-02ad-47a6-9f5a-a6ffb5619252.jpg

plate_1.webp

plate_1.png

I used the standard configuration for the 0.8 nozzle. I used:<ul><li>High-temperature plate (just to get a smooth surface).</li><li>Tree organic support was used, with a threshold angle of 30º and only on the plate.</li></ul>I also tested printing it using the upper surface as the base when printing, with and without supports. In all cases, I obtained perfectly useful results, however, the surface quality was poorer.

0.8mm nozzle, 0.4mm layer, 2 walls, 10% infill

This is a model of the leg of the heater model Convector Equation Labs 500 (it can be purchased in Leroy Merlin) copying the distances of the original one. Notice that the radius of curvature is not equal. I think that it should also fit the heater Sogo SS-18405, but I didn't test it

Print Profile(1)

Description

Comment & Rating (0)

License

Related Models

Fishing Reel Holder 500-3000

Furniture/Shelf legs

Stand monitor Montains

2D Indianapolis 500

Equation Labs 500 heater legs (Leroy Merlin 500W convector)