I modeled a poster for a Harry Potter themed decal into a 3d object that can be used to cast a shadow on a wall, or just as a table decoration if you like. I also included a simple stake that fits right into the base in case you want to cast it to the outside of your house from the yard. I am making it free to give back to the community for all the wonderful models I've found and wish for it to remain free for everyone and to not be used for sale.
Printed in PLA with Ender 3 (alter settings for other filaments or printers as needed)
Orientation: flat on the back Nozzle: 200 Bed: 55 Speed: 45mms Retraction distance: 4mm Retraction speed: 45mms
Walls: 3 Print thin walls: yes Order: inside to outside Top Layer: 2 Monotopic top/bottom: yes
Infill%: 20 Infill type: Quarter cubic (I find it gives a better top layer and is faster)
Support Type: Tree (only required for the main piece to support the hole for the stake) Support Location: Buildplate only Support Density: 10% Support Base: 25mm Support Overhang %: 50 Support Interface: yes Interface z space: .08 Interface x/z space: .1