Cammy Street Fighter Female Chracter Free 3D print model

3D MODEL DESCRIPTION When you download the model, you will have 2 Stl Files.

1-Base 2-Cammy Figure

It is recommended that you support the parts above 45%.

Follow me for more models You can send me a message about the model or in general. You can also reach me via social media.

Twitter : https://twitter.com/YunusKullebi Instagram: https://www.instagram.com/yunuskullebi/

3D PRINTING SETTINGS Print Temperature : : 200 Table Temperature : 60 Layer Height : 0.2 mm Intıal Layer Heigt : 0.2 mm Wall Line Count : 0.4 mm Fill Density : % 20

Support Settings

Support Stracture : Tree Maximum Branch Angle : 60 Branch Diameter : 3 Trunk Diameter : 16 Branch Diameter Angle : 5 Support Placement : Everywhere Prefferred Branch Angle : 25 Diameter İncrase to Model : 1 Minimum Height to Model : 3 Intial Layer Diameter : 6 Branch Destinty : 20 Tip Diameter : 0.8 Limit Branch Reach : Yes Optimal Branch Range : 30 Rest Preference : On Model if Required Support Overhang Angle : 55 Support Pattern : Gyroid Connect Support Lines : Yes Support Density : 5 Support Line Distance : 8 Intial Layer Support Line Distance :8 Support interface Thicknes : 1.2