Print at 100% infill with a layer height of 0.08mm with a base layer of 0.2mm
Filaments Used:
PLA Elegoo Black
PLA+ IIID Max Night Gray
PLA Jayo Wood
PLA+ IIID Max White
Swap Instructions:
Start with Black
At layer #6 (0.6mm) swap to Night Gray
At layer #7 (0.68mm) swap to Wood
At layer #13 (1.16mm) swap to White for the rest.
Other replacements that look good :
Instead of night gray use a dark brown (such as IIID Max brown)
Instead of wood use a IIID Max coyote brown or Overture orange or IIID Max Yellow