Tractor x Harvester 300%
The model is large and requires a fair amount of filament. PLA for everything except TPU for tires.
This print uses supports that works great for me. Some of them are pretty hard to remove but should come of easily. Some of them also needs to be rounded (the 43857 and so on) but are no problem doing).
With the parts, you can build to different models (see attached)
The blue (4 x 4206482-43093-Blue_small - with the little hole in the top) should be used for the pieces showing below. (The lime parts (1 x 6218483-11946-Lime + 1 x 6218484-11947-Lime) and the black parts (4 x 6284699-32013-Black). Tolerances are the reason why. The 7 last blue (7 x 4206482-43093-Blue_large) should be used for the rest.
Assembly: