This is a full set of bins for the Packout rotary tool organizer. Separate to objects in your slicer, and remove bins you don't want.

Read carefully if you want to customize the bins to your needs (and please let me know if explanation can be improved):

• The organizer has two openings of 155 mm each
• The sanding disc bin is 21 mm long
• The cutoff disc bin (any discs 1.5" diameter) is 43 mm long
• The buffing disc bin is 41 mm long
• The bin for 1/8"/3mm bits is parametric, length = rows*15 + 3 mm (ex. 4 rows = 63 mm)
• The catch-all bins are parametric. In the 3mf/stl files, both are 70.5 mm

Opening 1 = 21 + 63 + 70.5 = 154.5 mm (snug fit)

Opening 2 = 43 + 41 + 70.5 = 154.5 mm (snug fit)

After choosing your fixed bins, decide how large a shaft holder bin you need. Finally calculate the length of your catch-all bins, targeting a total length for each opening of 154 to 154.5 mm.

Parametric models:

shaft holder bin: https://makerworld.com/en/models/197789

catch all bin: https://makerworld.com/en/models/197872

A LOT of work & filament went into this design, thanks to Download and Like!