the HUEFORGE style moon. Designed in three colours, black, gray and cream white.
within the project there are 3 plates with moons in different sizes, one 100x100, one 200x200 and a last one with the maximum possible size of the plate.
if you want to resize to your liking, absolutely remember to set the height to 1.89 to maintain the properties of the layers

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Grey Transmission Distance: 5.6
PLA sunlu creamWhite Transmission Distance: 7

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Grey
At layer #16 (1.36mm) swap to creamWhite for the rest.