No Framework - 0.16mm layer, 3 walls - doesn't fly!!!
21 min
1 plate
4.7(13)
0.2mm layer, 2 walls, 15% infill
32 min
1 plate
5.0(1)
0.25mm layer, 3 walls, 15% infill
29 min
1 plate
4.0(1)
Boost
253
370
83
0
509
394
Released
Description
Relive your childhood with the ‘’Paper'' Plane kit card, perfect for party favours or to teach kids about 3D printing. This kit card is a fast print and showcases a unique property of thin 3D prints : its ability to fold.
EDIT/NOTE : Please note that this kit card has been designed with a 0,16mm layer height in mind. I cannot guarantee the quality of a print made with a 0,20mm layer height such as the other print profiles published.
Key Features :
Prints in under 1 hour
Fits on most printers, even the A1 Mini
Decreased height to facilitate folds
Will fly just as good as a bad paper plane (you gotta perfect the launch) AKA it won't really fly
Tab to hold business cards
Printing tips :
Make sure your buildplate is as clean as you can get it
Print at 0,16mm layer height with 100% infill
No AMS needed, you can pause for the text color change or print in a single color
Use PLA that has some flexibility to it so the folds don't snap (see list below)
Assembly instructions : Refer to the following guide guide
**If you are printing on the A1 Mini with AMS color change, you'll have to move the prime tower as shown here.
Thank you for your review. But please remember that you are rating the print profile here, not the model. If I understood correctly, the model is also meant to be a decorative object, not for flying. It is probably too heavy for that 🙈 I would be very grateful if you would only base the review on the print and change the review if necessary.
Thank you for your review. But please remember that you are rating the print profile here, not the model. If I understood correctly, the model is also meant to be a decorative object, not for flying. It is probably too heavy for that 🙈 I would be very grateful if you would only base the review on the print and change the review if necessary.
To be fair I have said in the description that it "Will fly just as good as a bad paper plane". I do not think that 3 stars are appropriate for a good print and a fair advertisement that it will not actually fly. IMO a bad paper plane does not fly..