File is ready to print
in case u want to change frame colour swap the last layer
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm
Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic blue silk Transmission Distance: 2
PLA BambuLab Matte Latte Brown Transmission Distance: 2
PLA BambuLab Basic Jade White Transmission Distance: 4
Swap Instructions:
Start with Black
At layer #6 (0.56mm) swap to Blue silk or other blue
At layer #16 (1.36mm) swap to Latte Brown
At layer #22 (1.84mm) swap to Jade White for the rest.
Reminder:
My models mostly cover the entire bed,
this means the purge line is sometimes
running through the bottom of the print.
You have 3 options here:
- Leave as is, you can just cut them of afterwards.
- Remove immediately after the purge line is printed.
- Scale the model:
*** WARNING ***
WHEN SCALING THE MODEL, BE SURE TO NOT SCALE THE Z-HEIGHT!
The Z-height must always be as original, otherwise the print
is messed up.
If u want to support my work
https://www.paypal.com/paypalme/MarcoMaineri?locale.x=it_IT
For request send me dm