Scary wolf at night during fulloon in the forrest. Great Hueforge design only printed in 3 colors. You don't need a AMS. You can do this with every printer with manually filament switch. Only install a pause at the layer in your slicer and you can get the same result.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments I Used:
PLA Sunlu Meta Black Transmission Distance: 1
PETG JAYO Gray Transmission Distance: 2.5
PLA BambuLab Basic Jade White Transmission Distance: 5

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Gray
At layer #13 (1.12mm) swap to Jade White for the rest.