Disney Villains - a collection of Disney villain images to print and hang on your wall.

Choose your favorite Disney villain from Hades, Gaston, Ursula, Maleficent, Cruella, Scar, Hook, The Evil Queen and Jafar... or print them all!

Here are all the instructions for printing all the Hueforge separately:

CRUELLA

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Yellow Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Yellow
At layer #19 (1.6mm) swap to Bone White for the rest.

THE EVIL QUEEN

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Blue Transmission Distance: 2.7
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #10 (0.88mm) swap to Blue
At layer #18 (1.52mm) swap to Bone White for the rest.
 

GASTON

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Grey Transmission Distance: 2
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Grey
At layer #19 (1.6mm) swap to Bone White for the rest.

HADES

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Light Blue Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Light Blue
At layer #19 (1.6mm) swap to Bone White for the rest.

HOOK

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Coffee Transmission Distance: 3
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #8 (0.72mm) swap to Coffee
At layer #20 (1.68mm) swap to Bone White for the rest.

JAFAR

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Red Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #16 (1.36mm) swap to Bone White for the rest.

MALEFICENT

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Yellow Transmission Distance: 6
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #12 (1.04mm) swap to Yellow
At layer #19 (1.6mm) swap to Bone White for the rest.
 

SCAR

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA Esun Orange Matte Transmission Distance: 2.5
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #11 (0.96mm) swap to Orange Matte
At layer #19 (1.6mm) swap to Bone White for the rest.

URSULA

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Sunlu Lilla Transmission Distance: 3.5
PLA+ Esun Bone White Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Lilla
At layer #19 (1.6mm) swap to Bone White for the rest.