I tried several screen bezels from MakerWorld, but the common problem was that they were too tight, making it very difficult to install or almost impossible to remove. I found that the original screen's cross-section was actually a trapezoid, so I made some modifications. After printing and testing, the result was satisfactory.
我尝试了网站里好几款屏幕边框,普遍的问题是太紧了,非常难安装到位,或是安装好后几乎拿不下来。于是我仔细观察,发现原厂屏幕的横截面实际上是一个梯形,于是我做出了相应的修改,经过打印测试,工作良好。