28mm MK4_Tactical_1 Galactic Crusaders Plate Armour Marines
Remixed by
Copyright Claim
28mm MK4_Tactical_1 Galactic Crusaders Plate Armour Marines
Remixed by
Boost
6
12
9
Print Profile(2)
0.2mm nozzle, 0.05mm layer, 4 walls, 15% infill
Designer
3.2 h
1 plate
0.4 nozzle, 0.08mm layer, 2 walls, 15% infill
Designer
1.1 h
1 plate
Boost
6
12
9
1
49
35
Released
Description
These have been remixed from Moonjammy's Plate Armour models.
For best result print with 50%, the slower the better on figures like this.
They were originally made for epic40k and Artic_Potato at Thingiverse have scaled and cleaned them up in blender, they should be about the same size as an oficial MK4 Marine.
They are not very detailed, but should be easy enough to print.
Im uploading to make them accessible on MakerWorld
Link to the original - https://www.thingiverse.com/thing:6417021
Comment & Rating (9)
All
Print Profile
0.4 nozzle, 0.08mm layer, 2 walls, 15% infill
i did this just see how well 28mm figures print. not bad at all. 😁
1
Reply
Print Profile
0.4 nozzle, 0.08mm layer, 2 walls, 15% infill
1
Reply
Print Profile
0.2mm nozzle, 0.05mm layer, 4 walls, 15% infill
Tree supports and no issues. I printed one at 0.6mm with a 0.2 nozzle on the A1 mini & one at 0.8mm with a 0.4 nozzle on the P1S with no issues on either.
The designer has replied
1
Reply
Awsome!
0
Reply
Print Profile
0.2mm nozzle, 0.05mm layer, 4 walls, 15% infill
Detail even at .4 nozzle is impressive!
0
Reply
Print Profile
0.2mm nozzle, 0.05mm layer, 4 walls, 15% infill
came out great
0
Reply
Print Profile
0.4 nozzle, 0.08mm layer, 2 walls, 15% infill
0
Reply
Print Profile
0.2mm nozzle, 0.05mm layer, 4 walls, 15% infill
0
Reply
Print Profile
0.4 nozzle, 0.08mm layer, 2 walls, 15% infill
0
Reply
No more
This remix is based on
License
This work is licensed under a
Creative Commons Attribution-NoncommercialRelated Models
© 2024 MakerWorld