Bambu Lab full AMS swatch print: 4 Samples in one go! by Wing-Art

Wing-Art

3D Printer>Test Models

Print Profile(3)

All

X1 Carbon

P1S

P1P

X1E

A1 mini

with ironing - 0.2mm layer, 2 walls, 15% infill

Designer

32 min

1 plate

5.0(6)

0.2mm layer, 2 walls, 15% infill

Designer

24 min

1 plate

5.0(1)

A1mini - 0.2mm layer, 2 walls, 15% infill

Designer

23 min

1 plate

5.0(1)

Boost

Released

Description

Deploy 4 filament swatches from your Bambu Lab in one go (one by one, not at the same time!) with this profile!
If you only want to print two or three swatches, simply skip the ones you don't want to print.

___

Fahre mit diesem Druckprofile nacheinander 4 Filament-Proben aus deinem Bambu Lab!
Wenn du nur zwei oder drei Swatches drucken möchtest, überspringe einfach diejenigen, die nicht gedruckt werden sollen.

Comment & Rating (14)

@WinterPoop

doesn't this waste more poop than printing it one by one?

The designer has replied

@WingArt

Thank you for your feedback. No, because the print is one by one it’s very practical, that means all 4 AMS-positions will be printed in a row, not at the same time.

(Edited)

@WingArt

in this order:

@WinterPoop

Replying to @WingArt :

Ah thats genius! I'll have to try this out!

@user_2046364251

Print Profile

A1mini - 0.2mm layer, 2 walls, 15% infill

prints great, love having 4 different colors on 1 plate.

The designer has replied

@WingArt

Thank you for your feedback!

@user_3575233740

Print Profile

with ironing - 0.2mm layer, 2 walls, 15% infill

these work great

The designer has replied

@WingArt

Thank you very much for your feedback Steve!

@Goon4hire

Print Profile

with ironing - 0.2mm layer, 2 walls, 15% infill

@user_1248165253

Print Profile

with ironing - 0.2mm layer, 2 walls, 15% infill

@Storm.Wolf

Print Profile

with ironing - 0.2mm layer, 2 walls, 15% infill

@peenmaster006

Print Profile

with ironing - 0.2mm layer, 2 walls, 15% infill

@billak

Print Profile

with ironing - 0.2mm layer, 2 walls, 15% infill

@gabrielsp

Print Profile

0.2mm layer, 2 walls, 15% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.