Bambu build plate glue & vent guide
Copyright Claim
Bambu build plate glue & vent guide
Boost
27
81
10
Print Profile(2)
PLA 0.08mm layer, 2 walls, 100% infill
Designer
15.2 h
4 plates
PETG Transparent 0.08mm layer, 2 walls, 100% infill
Designer
17.8 h
4 plates
Boost
27
81
10
0
46
22
Released
Description
Because I kept forgetting if I need to have the vent open/closed for a given filament type on a given buildplate type. I made this. What I did was on the Bambu store in what you should do (about midway towards the bottom of the buildplates on the store). I copied that into a 3D print. that away I can simply put this next to my printer, take a quick look, and go.
Note this only shows the material type, if you should glue it, and if a vent should be open. Vent being the door open, the top glass open, or if you have something like I do on the top which lets the air out of the top glass area without messing with the glass itself.
Comment & Rating (10)
All
It's a lot to ask, but an all-in-one version would be sweet.
The designer has replied
0
Reply
In the model it has 1 plate per buildplate type. The print profiles shows pictures of the build plates.
Anyways, adding all of it into 1 buildplate isn't possible because it would cause the text to be too small. Like it might be possible to do it standing up, but that will drastically increase how much filament is needed and time.
0
Reply
Replying to @craigtbii
I don't mean to be rude in any way, but I have to disagree about the text being too small.
for instance, if this much text can fit in such a small space...
https://makerworld.com/en/models/58548#profileId-60385
Then I don't think it should be a problem here, especially if you have the size of the whole build plate to play with.
Again, I really don't mean to be rude or demanding in any way. Please, please don't take it that way.
I'm just speaking as one designer to another. I just think that it's totally doable :)
.
(Edited)0
Reply
No love for the textured plate?
Edit: I should have gone to Spec Savers.
(Edited)The designer has replied
0
Reply
One of the plates is for the texture plate. In fact, the red and blue one (the first image) is for the texture plate.
0
Reply
Replying to @craigtbii
Yeah, I see that now.
"Spec Savers" sell cheap eye glasses for people who can't see very well 🤣
(it was a joke, calling myself blind)
(Edited)0
Reply
Print Profile
PLA 0.08mm layer, 2 walls, 100% infill
quite large. printed it scaled to 75% and it’s still big
0
Reply
Print Profile
PLA 0.08mm layer, 2 walls, 100% infill
1
Reply
Print Profile
PLA 0.08mm layer, 2 walls, 100% infill
1
Reply
Print Profile
PLA 0.08mm layer, 2 walls, 100% infill
0
Reply
No more
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share Alike
© 2024 MakerWorld