Printing Instructions:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Matte Charcoal Transmission Distance: 0.6
PLA CREALITY HYPER PLA GREY Transmission Distance: 3.3
MATTE PLA ELEGOO TEAL Transmission Distance: 3
PLA CREALITY HYPER PLA White Transmission Distance: 10

!!!! It appears you have mixed filament types. Be certain this is what you want. !!!!!

Swap Instructions:
Start with Charcoal
At layer #4 (0.4mm) swap to GREY
At layer #7 (0.64mm) swap to TEAL
At layer #10 (0.88mm) swap to White for the rest.

Enjoy!