F-35 Lightning II is the United States' newest fighter, developed and produced by Lockheed Martin. The F-35 is a 5th Gen multirole stealth fighter, resulting from the Joint Strike Fighter program. The JSF program aimed at providing an airframe that could fulfill the roles of the F-16, A-10, F/A-18, and AV-8B. Instead of one aircraft, three different variants share a similar airframe. The F-35A is the conventional takeoff and landing (CTOL) with an internal GAU-22 gatling cannon entering service in the USAF on August 2, 2016. The F-35B is the Short Takeoff and Vertical Landing (STOVL) variant. Lacking an internal gun, it entered service in the USMC on July 31, 2015. The F-35C is the carrier-based variant, with a stronger arrester hook, more robust landing gear, larger wings, and the highest fuel capacity of the three. It entered service in the USN on February 28, 2019. The F-35 has seen major export to many NATO countries, such as Australia, Belgium, Canada, Germany, and Israel.

This kit card was suggested by justin m. If you don't see an aircraft or helicopter that you like, feel free to suggest or commission it!

For best results print at 0.20mm layer height and %100 infill. Anything else and the kit card may not fit together correctly. Both Sprue and Sprue-less models included along with the individual parts. This kit card requires no glue. If you are printing with the individual parts you will want:

Wing x1

Fuselage/Landing Gear x1

Tail/Landing Gear L/R x1

If printing the F-35C with wings folded your will want:

Wing Folded x1

Fuselage/Landing Gear x1

Tail/Landing Gear L/R x1

Wing Spar x2

Wing Tip x2

Want to support these models and receive benefits? Consider checking out my Patreon

Want to sell physical prints of my models? Subscribe to Tier 3 of my Patreon