Golf Ball Holder
Copyright Claim
Golf Ball Holder
Boost
65
112
23
Print Profile(1)
0.2mm layer, 3 walls, 15% infill
Designer
1.6 h
1 plate
Boost
65
112
23
2
194
190
Released
Description
Golf ball & tee holder for your bag. Can hook on the side or has a hole through it so you can loop some paracord through it and use it in a hanging style.
Tee's are fit for normal wood tee diameter. If your tee's are larger you can add a negative cylinder to the model to make it bigger or use a drill bit to open it up some. Holds 3 golf balls and 6 tees securely.
Made one that you can clip on to your belt that holds 2 golf balls. Can be found here: https://makerworld.com/en/models/237792#profileId-253821
Comment & Rating (23)
All
Print Profile
0.2mm layer, 3 walls, 15% infill
Printed in Extruder ASA and faced some retraction Issues on the bottom. Next time I should try printing with brim. Hopefully this will solve the Issue.
(Edited)
The designer has replied
0
Reply
Printed again with Brim=5mm in-and-out , Size=103% in Extruder DuraPro ASA. No Retraction Issues anymore and the Balls fits still tight.
0
Reply
Replying to @user_3979502529
Thanks for the update. I don't print with ASA so thanks for letting anyone know the changes if they use that filament type.
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Printed perfect, golf balls fit kind of tight but thata a good thing so they don't fall out. Thank You
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
Super easy to pring, and it is super functional
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 15% infill
it's a nice design. I had a weird stringing issue with the end of the last ball holder, still works but next one i print I'm going to try rotating it 45 degrees on the plate as i think it might be too close to the edge of the bed and curling.
The designer has replied
0
Reply
Stringing has to do with your printer calibration not with the model. Good luck on the next print.
0
Reply
Boosted
Replying to @Nefarious
i'm not sure why it happened but second time i printed it, it came out fine.
0
Reply
Replying to @geoff.pedder
Glad to hear it!
0
Reply
Boosted
Print Profile
0.2mm layer, 3 walls, 15% infill
fantastic fit of balls
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
perfect print. made a couple for my buddies too
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
Print Profile
0.2mm layer, 3 walls, 15% infill
0
Reply
License
This work is licensed under a
Creative Commons Attribution-Noncommercial-Share AlikeRelated Models
© 2024 MakerWorld