Summary

Dab Station for DTV5 with Hubble Bubble

This Dab Station is specifically designed for the Divine Crossing v5 Atomizer with the Hubble Bubble and the Eleaf iStick Pico 75W. It features custom fittings to accommodate all the necessary components, including:

-Dab Mate (18mm x 12mm)
-Divine Crossing v5 Atomizer
-Eleaf iStick Pico 75W
-Original mouthpiece + 14mm glass mouthpiece
-Dab tool
-Glass bottle for alcohol with a corresponding lid
-Q-tips
-2x 18650 batteries
-Hubble Bubble (14mm)
-Terp Pearl Holder for multiple Terp pearls (up to 5mm)

Required Items (from Amazon/ no affiliate links)

-Protection Force Stopper Plug: Amazon Link
-Glass Bottle: Amazon Link
-Any Dab Mat with dimensions of 18mm by 12mm

License & Donation

Dab Station for DTV5 with Hubble Bubble & Pico 75W © 2023 by David Peters is licensed under CC BY-NC-SA 4.0. This means you are allowed to modify this work and share it with others, as long as it is not for commercial purposes, you give credit to the original creator (me), and you share your derivative work under the same license.

If you would like to support my work, you can donate to my PayPal and follow my Twitter

Print Settings

Rafts: 

Yes

Supports:                     

Yes

Resolution: 

0.2mm

Infill:                     

20%, Any/ Gyroid

Filament:
Any                    
                        

Notes:                    

Material & Brim

This print can be created using a variety of materials, such as PLA and ABS, although ABS is more suitable for higher temperatures. However, ABS can be challenging to print due to warping. To mitigate this issue, it is advised to utilize a wide brim as specified in the 3mf file.

Support

The use of supports is recommended to ensure even overhangs, despite the slight difficulty involved in their removal. The top and bottom supports can be easily dislodged with a screwdriver. As for the supports on the left and right, a box cutter can be used to loosen them, followed by pushing them out with an Allen key.

Infill

I recommend using an infill of at least 20% and a minimum of 3 walls for your print. You can choose any infill pattern, but personally, I find the "Gyroid" infill to be ideal in terms of both print time and strength.