Dove of peace

*created with filament painting technique using hueforge software.

Remember if you want to scale, do it only with x and y axis, z must be the same as original.

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA BambuLab Basic Blue Gray
PLA BambuLab Basic Beige
PLA BambuLab Basic Jade White

Swap Instructions: if you don't have ams just put pause on specified layers and swap filamen manually
Start with Blue Gray
At layer #6 (0.56mm) swap to Beige
At layer #19 (1.6mm) swap to Jade White for the rest.