Chassis for Ninco 2 hole body mount cars. This chassis is designed to use a slot.it sidewinder rear end, as seen in the pictures. This allows for a massive upgrade in the components that can be used in the car, any slot.it sidewinder gearing and any longcan style motors can be used in this motor pod. The chassis is also designed to hold up to 2 additional slot.it racing magnets outside of the one in the motor pod this can be used as ballast for to improve performance on a magnetic track. This chassis is similar to the Renault Megane chassis and will still fit on the Megane body, have also tested the chassis on the Mercedes CLK GT1 body from Ninco. Linked below is the motor pod and magnets used:

https://catalog.slot.it/product/product-details/?id=5455

https://catalog.slot.it/product/product-details/?id=553

I have printed my chassis from PETG to give some flex in the chassis and withstand the heat from the motor. I have not experimented with other materials. If you do please leave a review and tell how it performs!

I will continue to update the model if I find any improvements for the design. Currently the front axle is off the ground by less than 0.5mm in cornering the front will touch as the car rolls however no friction in the straights. This is a potential area for improvement and will experiment with different axle heights.

Also let me know what other body this chassis fits as all Ninco body seem to have the same wheelbase, leave a review and show everyone.