Wall lamp skull with cape + collar with top hat
the wall mount is already integrated
Eyes open the cylinder can be exchanged for other top parts
Cut (large format)
with 3 hand sizes
Pirate hook
Making off, for our skull lamps
https://www.youtube.com/watch?v=V5YrS1zzKeY
2 small examples of how this can look on the wall:
https://www.youtube.com/shorts/_mbLjwfQsUg
https://www.youtube.com/shorts/NAV4GEA-kAQ
Can also be used for storage only
3D model file
High polygon
Print this special lamp or storage unit.
The model is easy to produce by printing it in parts. A cable duct runs through the inside of the figure, starting from the hollow skull. The lid/headgear is removable.
Intended use: Decoration, lighting or storage (without lamp)
VERY IMPORTANT (as of 17.02.2024)
The headgear Eagle and Witch's Hat must still be adapted to the wall lamps. All other headgear fits
All models are prepared in such a way that light can be laid easily and well inside the sculpture. All models are available with closed and open eyes.
Of course, you are free to choose whether you want to use only the eyes as a light source or whether you want to print the headgear with a transparent material. Then you can either have the eyes and/or headgear light up or just the top of the head (with the eyes closed). All models are easily divisible and the series has been printed by us to ensure that everything is functional.
For each of these lamps there is the possibility to buy different headgear.
Further headgear
The removable headpiece can be printed with a transparent filament.
The light is then clearly visible, even without open eyes
We have purchased the following accessories
TIP for the frame
E14 lamp socket E14 lamp socket light bulb socket
Socket (link)
TIP for the lamp
Lamp (link)
TIP for the power cable
Power cable (link)
Please ensure that the lamps are installed correctly and professionally. By providing our instructions in videos and texts, we assume no liability for the installation or for the recommended components that we link to here. If in doubt, you should consult an electrician.
The total printable model comprises 11 STL and can be printed in parts:
Cape-Skull-Collar-Lamp-V1-Plate.stl
Cape-Skull-Collar-Wall-Lamp_Open_Eyes.stl
Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_BODY.stl
Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_BODY-BOTTOM.stl
Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_HEAD.stl
Hand.stl
Hand-BIG.stl
Hand-EXTRA.stl
Headgear-CylinderHat.stl
Pirate-Hook-Arm.stl
Pirate-Hook-hook.stl
Detailed help for printing our models
Designing the eyes
Further helpful learning videos
License Information:
These files are available under the "Royalty-Free License". This means that printed or otherwise created versions of this model may not be used or sold for commercial purposes.
The distribution of STL files is not permitted.
Watermarks and changes:
The original STL file and modified versions may not be changed or sold as they are protected with a digital, invisible watermark.
If you wish to make changes to the model, please contact the designer, Bernhard Queißer, from QU3D in Germany. He is open to dialog and will be happy to discuss your modification requests.
Design + Copyright: Bernhard Queißer
QU3D.de
Country of origin: Germany