Wall lamp skull with woolly hat
Eyes open, the woolly hat can be exchanged for other tops
The wall mount is already integrated
Cut (large format)
with 3 hand sizes
Pirate hook
Making off, for our skull lamps
https://www.youtube.com/watch?v=V5YrS1zzKeY
2 small examples of how this can look on the wall:
https://www.youtube.com/shorts/_mbLjwfQsUg
https://www.youtube.com/shorts/NAV4GEA-kAQ
Can also be used for storage only
3D model file
High polygon
Print this special light or storage.
The model is easy to produce by printing it in parts. A cable duct runs through the inside of the figure, starting from the hollow skull. The lid/headgear is removable.
Intended use:
Decoration, lighting or storage (without lamp)
VERY IMPORTANT (as of 17.02.2024)
The headgear Eagle and Witch's Hat must still be adapted to the wall lamps. All other headgear fits
All models are prepared in such a way that light can be laid easily and well inside the sculpture. All models are available with closed and open eyes.
For the skulls with closed eyes, you can print the headgear with a transparent filament to create a beautiful, subtle light. All models are easy to divide and the series has been printed by us to ensure that everything is functional.
For each of these lamps there is the option to buy different head covers.
Further headgear
The removable headpiece can be printed with a transparent filament.
The light is then clearly visible, even without open eyes
We have purchased the following accessories
TIP for the frame
E14 lamp socket E14 lamp socket light bulb socket
Socket
TIP for the mains cable
Please ensure that the lamps are installed correctly and professionally. By providing our instructions in videos and texts, we assume no liability for the installation or for the recommended components that we link to here. If in doubt, you should consult an electrician.
The total printable model comprises 13 STL and can be printed in parts:
Cape-Skull-Collar-Lamp-V1-Plate.stl
Cape-Skull-Collar-Wall-Lamp_Open_Eyes.stl
Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_BODY.stl
Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_BODY-BOTTOM.stl
Cape-Skull-Collar-Wall-Lamp_Open_Eyes_CUT_HEAD.stl
Hand.stl
Hand-BIG.stl
Hand-EXTRA.stl
Headgear-Woolen-Cap.stl
Headgear-Woolen_CUT-BACK.stl
Headgear-woolcoat_CUT-FRONT.stl
Pirate-Hook-Arm.stl
Pirate-Hook-hook.stl
License Information:
These files are available under the "Royalty-Free License". This means that printed or otherwise created versions of this model may not be used or sold for commercial purposes.
The distribution of STL files is not permitted.
Watermarks and modifications:
The original STL file and modified versions may not be changed or sold as they are protected with a digital, invisible watermark.
If you wish to make changes to the model, please contact the designer, Bernhard Queißer, from QU3D in Germany. He is open to a dialog and will be happy to discuss your change requests.
Please note that the 3D print file may not be modified without prior consultation with us (Qu3D 3D-Design Art). Furthermore, the sale of the 3D print file is not permitted and is subject to license law.
You can select this option when purchasing the model.
Design + Copyright: Bernhard Queißer
QU3D.de
Country of origin: Germany