you can use the settings provided for any of the 3 raw files but i would advise using the normal V2

V2:
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #7 (0.72mm) swap to Blue
At layer #11 (1.04mm) swap to Jade White
At layer #13 (1.2mm) swap to Blue
At layer #16 (1.44mm) swap to Black
At layer #18 (1.6mm) swap to Red
At layer #20 (1.76mm) swap to Yellow
At layer #29 (2.48mm) swap to Jade White for the rest.

with ams light add pause at layer 17 and swap blue for red

V2 inverted:

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Red Transmission Distance: 4
PLA BambuLab Basic Yellow Transmission Distance: 6
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Blue Transmission Distance: 4

Swap Instructions:
Start with Black
At layer #8 (0.8mm) swap to Red
At layer #10 (0.96mm) swap to Yellow
At layer #19 (1.68mm) swap to Jade White
At layer #23 (2mm) swap to Black
At layer #27 (2.32mm) swap to Blue
At layer #31 (2.64mm) swap to Jade White for the rest.

if you have an ams light add pause at layer 9 and swap the red for black

v1 (unrefined):

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm

Filaments Used:
PLA BambuLab Basic Black Transmission Distance: 0.6
PLA BambuLab Basic Blue Transmission Distance: 4
PLA BambuLab Basic Jade White Transmission Distance: 5
PLA BambuLab Basic Red Transmission Distance: 5
PLA BambuLab Basic Gray Transmission Distance: 2
PLA BambuLab Basic Yellow Transmission Distance: 6

Swap Instructions:
Start with Black
At layer #9 (0.88mm) swap to Blue
At layer #14 (1.28mm) swap to Jade White
At layer #17 (1.52mm) swap to Black
At layer #18 (1.6mm) swap to Red
At layer #20 (1.76mm) swap to Gray
At layer #21 (1.84mm) swap to Yellow
At layer #22 (1.92mm) swap to Jade White for the rest.