⭐⭐⭐⭐⭐ Rate the project! ⭐⭐⭐⭐⭐

Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm

Filaments Used:
PLA+ Sunlu Black Transmission Distance: 0.6
PLA+ Esun Red Transmission Distance: 6
PLA+ Sunlu Beige Transmission Distance: 7.6

Swap Instructions:
Start with Black
At layer #9 (0.8mm) swap to Red
At layer #11 (0.96mm) swap to Beige for the rest.