Statue of Liberty - Breaking Bad
Statue of Liberty - Breaking Bad
Print Profile(1)
Description
Lady Liberty in the lab doing some business :>
Print at 100% infill with a layer height of 0.2mm with a base layer of 0.32mm
Use any colors you'd like, either via AMS or by manually swapping filaments as indicated below.
Filaments Used:
PLA SPARKLE BambuLab Slate Gray Sparkle Transmission Distance: 1
PLA BambuLab Matte Marine Blue Transmission Distance: 15
PLA BambuLab Matte Lemon Yellow Transmission Distance: 15
PLA BambuLab Basic Jade White Transmission Distance: 1
Swap Instructions:
Start with Slate Gray Sparkle
At layer #5 (1.12mm) swap to Marine Blue
At layer #8 (1.72mm) swap to Lemon Yellow
At layer #14 (2.92mm) swap to Jade White for the rest.
If you want to resize the print, DO NOT change the Z axis.
Happy printing, and share your make!
Comment & Rating (0)
License
You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.
