Universal 9mm Pistol Wall Mount

Here is a pistol wall mount I made after getting irritated that no single mount would fit my pistol.

This mount can fit both compact and full sized pistols with torches and optics.

Printed Pin vs Carbon Rod

There are two model options, one with a hole for a carbon fiber rod, and one with a printed pin.

I recommend using the carbon rod because the printed pin is hard to get strong in the correct orientation. The moment made on the pin will usually be in its weak axis, unless printed on its side (which would then need support).

The carbon fiber rods can be purchased from amazon, any 7mm carbon fiber rod will work but here is what I used.

https://www.amazon.com/dp/B0BX93J44B?psc=1&ref=ppx_yo2ov_dt_b_product_details

I used a Dremel to cut the rod to size and then used sandpaper to bevel the cut edge.

Request

Leave a comment if you want me to change the size of the hole to fit a different carbon rod to maybe work with a .22. This model will also work with .45, and .380 using the 7mm rod.