AMS 250g spool adapter (universal) by Staprin3D

Staprin3D

3D Printer>3D Printer Accessories

Print Profile(1)

All

P1S

P1P

X1 Carbon

X1E

0.16mm layer, 2 walls, 15% infill

Designer

4.1 h

2 plates

4.6(9)

Boost

Released

Description

I have several small 250g spools for multi-color printing from different manufacturers. Unfortunately, these also have different inner diameters and widths.

I have therefore built an AMS spool adapter so that I can use the small cardboard spools in the AMS.

The adapter is designed so that it can be used for inner diameters of 40-63 mm. The adapter is designed so that the width can be set to the optimum width for the AMS.

Assembly:

Place the coil on the ring with cone
Screw in the cone screw
Screw the locking ring onto the second ring
Fit the second ring, set the width of the bobbin adapter to 65-68 mm and then secure it against the cone nut with the locking ring.

If the inserted bobbin is wide enough, the fixing ring can be omitted and the second ring is screwed in up to the cone screw.

Comment & Rating (10)

@user_1499553184

Print Profile

0.16mm layer, 2 walls, 15% infill

Funktioniert bestens

@webwurd

Print Profile

0.16mm layer, 2 walls, 15% infill

Other Issues:Didn’t fit my 63mm spool

The designer has replied

@Staprin3D

Hi, can you describe this in more detail? The largest diameter of the cone is 64mm, so your 63mm coil should actually fit.

@user_34313021

Print Profile

0.16mm layer, 2 walls, 15% infill

@Imagination

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_4232301366

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_818572035

Print Profile

0.16mm layer, 2 walls, 15% infill

Strength Issue

@user_3220632170

Print Profile

0.16mm layer, 2 walls, 15% infill

@QuinLux_3D

Print Profile

0.16mm layer, 2 walls, 15% infill

@user_2945708789

Print Profile

0.16mm layer, 2 walls, 15% infill

No more

License

This work is licensed under a Standard Digital File License.

You shall not share, sub-license, sell, rent, host, transfer, or distribute in any way the digital or 3D printed versions of this object, nor any other derivative work of this object in its digital or physical format (including - but not limited to - remixes of this object, and hosting on other digital platforms). The objects may not be used without permission in any way whatsoever in which you charge money, or collect fees.